When using a counter to output PWM wave, can it be used as interrupt source?
When a counter is used as a PWM output at the time, the counter can also be...
- Home(En) /
- 查詢結果
keyword：*
-
-
Can "Call" instruction be executed in Interrupt Service Routine?
Because of sonix MCU Stack number limitations, users should pay special att...
-
P00 settings completely correct, why can not enter interrupt?
First, make sure P00 interrupt settings are correct, such as P00IEN is set ...
-
Why chips can not enter interrupt?
First, check the corresponding interrupt source control bit whether set to ...
-
Program can not enter interrupt routine, what aspects need to check?
Users need to check the following aspects: 1. Check whether the globa...
-
Does SONIX MCU have interrupt priorities? How to set?
SONIX MCU hardware does not have interrupt priorities. However, in applicat...
-
In AD application, what precautions should be taken for external circuit design and PCB layout?
1. In AD input signal circuit design, it is proposed to series connected an...
-
How to define RAM BANK1?
The ram of SONIX USB IC's is at least 256, up to 512, so ram is divided int...
-
When using a counter to output PWM wave, can it be used as interrupt source?
When a counter is used as a PWM output at the time, the counter can also be...
-
What matters need to be paid attention to when using Sonix in-built real-time clock (RTC) function?
1 User can enable or disable RTC function by execute B0BSET FT0TB or B0BCLR...