What is the meaning for "1T" mentioned in SONIX MCU specifications?
The meaning of "1T" is MCU maximum operation clock speed, that is Fcpu = Fo...
- Home(En) /
- 查詢結果
keyword：*
-
-
What is the state for Xout pin in the external RC oscillator mode?
In external RC mode, the oscillation signal is input to MCU internal throu...
-
What is the general power consumption for MCU in sleep mode?
MCU power consumption is minimum when enter Sleep Mode (not exceed 2uA). IC...
-
How to select parameters to get 4MHz RC oscillator frequency at VDD = 5V power supply?
When use external RC oscillator circuit to obtain system clock, It is sugg...
-
Why chips can not enter sleep mode?
The program can enter Sleep Mode by setting: B0BSET CPUM0, If the system ca...
-
What is the VDD rise time limitation when MCU Power On?
In order to make fully successful for MCU Power On Reset, the proposed Powe...
-
In power down mode, how to set input pin to get the lowest current?
1. In sleep mode, the input pin should be set to input pull-up state and c...
-
How to use Watchdog properly?
SONIX micro-controller watchdog timer's clock source is from internal low-s...
-
How to set in program to increase MCU stability in/out GREEN MODE?
In order to increase the stability of MCU in/out GREEN MODE, in mode switc...
-
What is the specific meaning for ViL/ViH in SONIX MCU electrical characteristic?
◆ ViL——when I/O port is input mode, the input voltage changes from 0 to VDD...