Why chips can not enter sleep mode?
The program can enter Sleep Mode by setting: B0BSET CPUM0, If the system ca...
- Home(En) /
- 查詢結果
keyword：*
-
-
For 2 series MCU, will TC0 continue to count and wake up the system under Green Mode?
For most MCU, when the system enters green mode, the wake-up source can be ...
-
How to set to enter low-speed mode properly?
Switching into low-speed mode can be divided into two situations: keep on e...
-
What is the state for Xout pin in the external RC oscillator mode?
In external RC mode, the oscillation signal is input to MCU internal throu...
-
What is the meaning for "1T" mentioned in SONIX MCU specifications?
The meaning of "1T" is MCU maximum operation clock speed, that is Fcpu = Fo...
-
How to select parameters to get 4MHz RC oscillator frequency at VDD = 5V power supply?
When use external RC oscillator circuit to obtain system clock, It is sugg...
-
What is the general power consumption for MCU in sleep mode?
MCU power consumption is minimum when enter Sleep Mode (not exceed 2uA). IC...
-
What issues should be paid attention to when using RC oscillator?
RC oscillation frequency is mainly influenced by the following conditions: ...
-
System board using RC oscillator, how to solve the simulation and real chip operating frequency error problem?
It is proposed to use crystal when simulation, the actual chip with RC osci...
-
Can target board provide system clock?
No, it can't, internal crystal oscillator of emulator is the default crysta...