Why chips can not enter sleep mode?
The program can enter Sleep Mode by setting: B0BSET CPUM0, If the system ca...
- Home(En) /
- 查詢結果
keyword：*
-
-
What should be paid attention to for SONIX USB IC USB peripheral circuit?
Please refer to the reference circuit in USB Library, arbitrarily modify US...
-
How to set to enter low-speed mode properly?
Switching into low-speed mode can be divided into two situations: keep on e...
-
How re-enumerate USB device not plug USB interface and analog software plug movement?
In USB applications, there is no need to plug USB device to enumerate USB a...
-
For 2 series MCU, will TC0 continue to count and wake up the system under Green Mode?
For most MCU, when the system enters green mode, the wake-up source can be ...
-
How to improve USB anti EFT performance?
1. It is recommended to use reference circuit that SONiX provided in design...
-
How to set before entering power down mode for low power consumption?
Before entering Power down mode, you need to make some settings as follows:...
-
What is the general power consumption for MCU in sleep mode?
MCU power consumption is minimum when enter Sleep Mode (not exceed 2uA). IC...
-
How to send more than 8 bytes data to PC host using USB low-speed device?
USB protocol show that low-speed USB device can transmit a maximum of 8Byte...
-
How to read Endpoint 1 / 2 downloading data?
Usually, when user download information using other endpoints, he can read ...