What matters need to be paid attention to when using Sonix in-built real-time clock (RTC) function?
1 User can enable or disable RTC function by execute B0BSET FT0TB or B0BCLR...
- Home(En) /
- 查詢結果
keyword：*
-
-
What matters need to be paid attention to when using Sonix in-built real-time clock (RTC) function?
1 User can enable or disable RTC function by execute B0BSET FT0TB or B0BCLR...
-
How to update the duty and cycle in using PWM functions?
PWM duty cycle can be changed by TC0R, period cycle can be changed through ...
-
How to set RTC when IC simulation and application, what should be note for?
1．For MCU type with RTC function(2501B, 2308, 2808, 26Lxx), in simulation, ...
-
What's the difference of timer function between Low-speed mode and normal mode? How to calculate time?
When the system switch to slow mode from normal mode, (refer to system oper...
-
When using a counter to output PWM wave, can it be used as interrupt source?
When a counter is used as a PWM output at the time, the counter can also be...
-
Can sonix PWM module (which is integrated in MCU) output a variety of frequencies? Is it controllable and adjustable?
Yes, for Sonix MCU, there are many ways to change PWM output frequency. PWM...
-
In AD application, what precautions should be taken for external circuit design and PCB layout?
1. In AD input signal circuit design, it is proposed to series connected an...
-
Program can not enter interrupt routine, what aspects need to check?
Users need to check the following aspects: 1. Check whether the globa...
-
Can "Call" instruction be executed in Interrupt Service Routine?
Because of sonix MCU Stack number limitations, users should pay special att...