When using a counter to output PWM wave, can it be used as interrupt source?
When a counter is used as a PWM output at the time, the counter can also be...
- Home(En) /
- 查詢結果
keyword：*
-
-
What is the clock source of Sonix MCU Timer/counter? How to set the timer frequency divider?
Timer / Counter TC0 has dual clock source, user can select internal clock o...
-
What's the difference of timer function between Low-speed mode and normal mode? How to calculate time?
When the system switch to slow mode from normal mode, (refer to system oper...
-
Can sonix PWM module (which is integrated in MCU) output a variety of frequencies? Is it controllable and adjustable?
Yes, for Sonix MCU, there are many ways to change PWM output frequency. PWM...
-
How to set RTC when IC simulation and application, what should be note for?
1．For MCU type with RTC function(2501B, 2308, 2808, 26Lxx), in simulation, ...
-
How to update the duty and cycle in using PWM functions?
PWM duty cycle can be changed by TC0R, period cycle can be changed through ...
-
For 2 series MCU, will TC0 continue to count and wake up the system from Green Mode?
For most MCU, when the system goes into green mode, the wake-up source can ...
-
How much is Sonix MCU I/O port drive current?
I/O port drive current can be divided into source current and sink current,...
-
What should be noted when switch IO port from output mode to input mode?
1.Steps for input mode switching to output mode: (1) Initial I/O status,...
-
When use Reset / Px.x pin as input port, why can not read high?
1.Users need to check whether the Reset option is selected Px.x in code opt...